Load data for .25 ACP (6.35 Browning) + .251 | 50gr | Speer Hollow Point Gold Dot

Recommended Powder(s): ReloadSwiss RS 12

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.251 \| 50gr \| Speer Hollow Point Gold Dot
Manufacturer SKU:	3985
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.251" \| 6.38mm
Bullet Length:	0.370" \| 9.4mm
Caliber:	.25 ACP (6.35 Browning) load data
Case Length (l3):	0.612" \| 15.5mm
Cartridge Length (C.O.L.):	0.891" \| 22.6mm
Seated Depth:	0.091" \| 2.3mm
Shank Seated Depth:	0.091" \| 2.3mm
Case Capacity:	4.9 Grains of Water \| 0.32 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	17405 psi \| 1200 bar
LID:	LID_B6082_C193
Last updated:	2025-02-02

Load data for 46 loads in caliber .25 ACP (6.35 Browning) with .251 | 50gr | Speer Hollow Point Gold Dot bullet and 23 powders such as ReloadSwiss RS 12. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AS 30	<<locked>>	69%	15171	87%	**5	100%
Accurate Solo 1250	<<locked>>	74%	13474	77%	**8	92%
[Alliant BULLSEYE]*	<<locked>>	67%	15374	88%	**07	88%
[Alliant UNIQUE]*	<<locked>>	76%	13198	76%	**4	84%
Baschieri & Pellagri 100	<<locked>>	67%	12908	74%	**6	96%
Hodgdon Universal	<<locked>>	69%	13561	78%	**4	93%
[Lovex S020]*	<<locked>>	70%	13126	75%	**8	87%
Maxam CSB 1	<<locked>>	82%	15505	89%	**4	94%
Maxam CSB 2	<<locked>>	80%	12865	74%	**04	97%
Maxam CSB 3	<<locked>>	69%	13198	76%	**2	96%
Maxam CSB 4	<<locked>>	71%	15156	87%	**4	99%
Maxam CSB 5	<<locked>>	65%	15098	87%	**1	100%
ReloadSwiss RS 12 👍	<<locked>>	73%	14707	85%	**50	100%
[ReloadSwiss RS 20]*	<<locked>>	79%	13431	77%	**8	86%
[SNPE Vectan A0]*	<<locked>>	76%	14112	81%	**5	84%
SNPE Vectan BA 9	<<locked>>	70%	15258	88%	**5	91%
SNPE Vectan BA9 1/2	<<locked>>	69%	13213	76%	**8	91%
[Somchem MP200]*	<<locked>>	72%	14924	86%	**4	84%
[Somchem MS200]*	<<locked>>	75%	15055	87%	**4	87%
Vihtavuori N320	<<locked>>	68%	12966	74%	**5	99%
Vihtavuori N32C Tin Star	<<locked>>	89%	11502	66%	**6	100%
Vihtavuori N330	<<locked>>	75%	13779	79%	**01	94%
[Vihtavuori N340]*	<<locked>>	80%	15650	90%	**14	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AS 30	<<locked>>	60%	12067	69%	**9	100%
[Accurate Solo 1250]*²	<<locked>>	59%	8746	50%	**4	84%
[Alliant BULLSEYE]*	<<locked>>	60%	12633	73%	**5	84%
[Alliant UNIQUE]*	<<locked>>	69%	11110	64%	**9	80%
[Baschieri & Pellagri 100]²	<<locked>>	59%	10312	59%	**7	92%
Hodgdon Universal	<<locked>>	62%	11255	65%	**9	90%
[Lovex S020]*	<<locked>>	64%	10675	61%	**6	83%
[Maxam CSB 1]*	<<locked>>	60%	8514	49%	**8	83%
[Maxam CSB 2]*²	<<locked>>	58%	6904	40%	**4	86%
Maxam CSB 3	<<locked>>	62%	10617	61%	**3	93%
Maxam CSB 4	<<locked>>	63%	12154	70%	**6	97%
[Maxam CSB 5]²	<<locked>>	57%	11719	67%	**3	100%
ReloadSwiss RS 12	<<locked>>	60%	9544	55%	**9	96%
[ReloadSwiss RS 20]*	<<locked>>	73%	11168	64%	**6	82%
[SNPE Vectan A0]*	<<locked>>	69%	11690	67%	**6	80%
[SNPE Vectan BA 9]*	<<locked>>	64%	12676	73%	**2	88%
[SNPE Vectan BA9 1/2]*	<<locked>>	62%	10733	62%	**3	87%
[Somchem MP200]*	<<locked>>	66%	12473	72%	**5	81%
[Somchem MS200]*	<<locked>>	68%	12343	71%	**6	84%
Vihtavuori N320	<<locked>>	61%	10240	59%	**9	96%
Vihtavuori N32C Tin Star	<<locked>>	62%	5932	34%	**2	96%
[Vihtavuori N330]*	<<locked>>	61%	9181	53%	**6	86%
[Vihtavuori N340]*	<<locked>>	67%	10776	62%	**9	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data